Flow simulations on an organ pipe foot model.

The present paper shows numerical simulations of the flow responsible for the sound generation in an organ pipe. Only the foot model of the organ pipe (i.e., with the resonator detached) is investigated by two-dimensional incompressible CFD simulations. It is shown that in spite of the moderately high Reynolds number (Re≈2350) no turbulence modeling is necessary. Free jet simulation (foot model without the upper lip) showed that the jet oscillates due to its natural instability. The velocity profile, the centerline and the width of the jet is determined at different heights above the flue. Edge tone simulations (foot model with the upper lip) were carried out having the upper lip at a constant height but at different x positions. It was found that the strongest and most stable edge tone oscillation occurs if the lower left corner of the upper lip is in the centerline of the jet (optimum position). When the upper lip is far from its optimum position the oscillation of the jet is rather due to the natural instability of the jet than the edge tone phenomenon. The results agree well with the experimental results of Außerlechner et al. [J. Acoust. Soc. Am. 126, 878-886 (2009)] and Außerlechner (Ph.D. thesis, Universität Stuttgart, Stuttgart, Germany) and with former results of the authors [Paál and Vaik, Int. J. Heat Fluid Flow 28, 575-586 (2007); Paál and Vaik, in Conference on Modelling Fluid Flow (CMFF'09), Budapest, Hungary].